Electrical Lamp Load 2.5 kW

Product Code : SCL-EAE-11166

The Electrical Lamp Load 2.5 kW is an electrical laboratory load apparatus used to apply controlled lamp-based resistive loading for electrical machine testing, power-source loading, voltage-current study, and load-response experiments. It is suitable for engineering colleges, polytechnics, ITI/TVET centres, electrical training labs, distributors, and institutional procurement buyers.

Product Description

The Electrical Lamp Load 2.5 kW from Lab Equipments Ambala is best positioned under Physics Lab / Electrical and Electronics / Electrical Machine Training Apparatus. A dedicated product page with final product code, voltage rating, phase type, lamp configuration, switching steps, current rating, protection, enclosure, and duty cycle should be confirmed before publishing.

A lamp load provides a visible resistive load by using lamps as load elements. In laboratory use, a 2.5 kW electrical lamp load can help students observe loading, current draw, voltage change, power consumption, brightness variation, and machine performance under controlled load conditions, subject to the confirmed wiring and rating.

Key Features

• 2.5 kW load rating: product name indicates 2.5 kW load capacity; final continuous or intermittent rating should be confirmed.
• Lamp-based resistive loading: provides a visible load condition through lamp banks or switched lamp circuits.
• Electrical machine training: suitable for loading generators, alternators, power supplies, and training panels when correctly rated.
• Stepwise load control: can support gradual load variation if the final unit includes switching steps.
• Measurement-based practicals: works with voltmeters, ammeters, wattmeters, multimeters, and power analyzers.
• Teaching visibility: lamp brightness gives students a direct visual indication of load change.
• Specifications pending: voltage, phase, current, lamp count, switching arrangement, protection, and enclosure details must be verified.

Technical Specifications

What's Included in the Kit

• Electrical Lamp Load 2.5 kW main unit
• Lamp bank or lamp load panel
• Individual lamp holders or load sections
• Step switches, selector switches, or control panel
• Input/output terminals and earthing point
• Fuse, MCB, guard, ventilation, or protective enclosure
• Instruction manual, wiring diagram, test report, or certificate

Applications / Uses

• Applying controlled lamp load to generators, alternators, and power-source trainers
• Studying voltage drop, current rise, and power behaviour under load
• Demonstrating visible load variation through lamp brightness
• Supporting regulation and loading experiments in electrical machine laboratories
• Training students in safe load switching, measurement, and shutdown procedure
• Using lamp load sections for practical electrical testing where the confirmed rating permits

How to Use the Electrical Lamp Load 2.5 kW

1. Place the lamp load unit on a stable, dry, ventilated surface with clear space around the lamps and enclosure.
2. Confirm the voltage, current, phase, total load rating, lamp rating, duty cycle, and earthing requirement before connection.
3. Connect the unit to the power source, generator, alternator, or trainer according to the approved wiring diagram.
4. Connect suitable meters such as a voltmeter, ammeter, wattmeter, or power analyzer if readings are required.
5. Keep all lamp switches off or at the minimum-load setting before energising the circuit.
6. Switch on the supply and add lamp load gradually using the approved switches or selector.
7. Record voltage, current, power, brightness, regulation, or efficiency readings as required.
8. Reduce the load, switch off the supply, and allow lamps and enclosure surfaces to cool before handling.

Safety note: Use the Electrical Lamp Load 2.5 kW only within its confirmed voltage, current, phase, load, and duty ratings. Lamp loads generate heat and may expose high voltage at terminals; use proper earthing, insulated leads, trained supervision, protective switching, and cooldown time after operation.

Care & Maintenance

• Allow lamps and enclosure surfaces to cool fully after loaded operation.
• Inspect lamp holders, switches, terminals, insulation, earthing, and wiring before each use.
• Replace fused or damaged lamps only with the confirmed matching rating.
• Keep the unit dry, dust-free, ventilated, and protected from vibration or impact during storage.

Why Choose Lab Equipments Ambala

Lab Equipments Ambala manufactures and exports scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. The brand supplies electrical and electronics apparatus, physics laboratory equipment, electrical machines trainers, power supply units, lab meters, resistance boxes, and current-control equipment for educational institutions. Its equipment range supports practical learning in current electricity, load testing, power measurement, and electrical machine performance. Buyers should request final specifications before procurement to confirm product code, voltage, phase, lamp configuration, protection, duty cycle, packing, and documentation.

Frequently Asked Questions

What is an Electrical Lamp Load 2.5 kW used for?

An Electrical Lamp Load 2.5 kW is used to apply a controlled lamp-based resistive load for generator, alternator, power-source, and electrical machine training experiments.

Is the 2.5 kW load rating confirmed?

The product name states 2.5 kW. The final voltage, current, phase type, lamp configuration, and continuous or intermittent duty rating should be confirmed before publishing.

How does a lamp load work?

A lamp load works by using lamps as resistive load elements. When connected to a suitable source, the lamps consume electrical power and provide visible load indication through brightness.

What instruments are used with this unit?

Typical supporting instruments include voltmeters, ammeters, wattmeters, multimeters, power analyzers, and the electrical machine or power source under test.

Can students operate the 2.5 kW lamp load independently?

No. A 2.5 kW lamp load should be used only under trained instructor or laboratory technician supervision because it involves high power, heat, switching, and electrical safety controls.

What details should be confirmed before ordering?

Confirm product code, voltage rating, phase type, current rating, lamp wattage, number of lamps, switching arrangement, protection, enclosure, dimensions, weight, duty cycle, and documentation.

For related electrical laboratory equipment, explore Electrical and Electronics equipment, Lab Meters, Rheostat Constantine/Eureka Wire, and Contact Lab Equipments Ambala for confirmed specifications and institutional enquiries.