Physics Mass Calibration Kit 100g

Product Code : SCL-AM-11235

The Physics Mass Calibration Kit 100g is a laboratory mass-measurement set used for teaching mass comparison and checking the response of suitable balances up to a nominal 100 g reference value. It is intended for physics laboratories, schools, colleges, technicians and laboratory instructors who require a reusable mass for routine balance checks and educational activities.

Product Description

The kit provides a nominal mass capacity of 100 g for comparative weighing, balance-response checks and introductory measurement exercises. Depending on the approved product configuration, the kit may contain one 100 g test mass or several smaller masses with a combined nominal value of 100 g. The exact composition must be confirmed before publication or procurement.

The product can support work with mechanical and electronic laboratory balances. It is suitable for instructional use with equipment from the laboratory balances range. A kit should be described as a certified calibration standard only when its accuracy class, measured mass values and calibration traceability are supported by valid documentation.

Key Features

• 100 g nominal capacity: Provides a defined mass value for balance checking and classroom measurement activities.
• Educational measurement aid: Helps students understand mass comparison, balance operation and measurement uncertainty.
• Reusable format: Designed for repeated supervised use in physics and general science laboratories.
• Balance-checking application: Helps identify large indication errors, unstable readings or incorrect balance setup.
• Controlled handling: A storage case and handling tools can reduce contamination when included in the approved kit.
• Specification-based supply: Material, tolerance, mass sequence and certificate requirements can be defined before ordering.
• Honest calibration status: The product is not presented as traceable or certified unless supporting documents are supplied.

Technical Specifications

What’s Included in the Kit

The exact packing configuration has not been verified. Confirm the following before publishing the final product page:

• One 100 g mass or a combination of masses totaling 100 g
• Protective storage case
• Forceps, weight lifter or handling tool
• Cleaning cloth or gloves
• Inspection or calibration certificate

Applications / Uses

• Teaching the measurement and comparison of mass
• Checking whether a laboratory balance produces a stable reading
• Demonstrating balance zeroing and repeatability
• Conducting comparative exercises with a Double-Beam Balance
• Supporting weighing activities with a Triple-Beam Balance
• Introducing good mass-handling and laboratory-recording practices
• Supporting measurement activities in a complete physics laboratory

How to Use the Physics Mass Calibration Kit 100g

1. Place the balance on a stable, level and vibration-free surface.
2. Allow an electronic balance to warm up when required by its instructions.
3. Check that the weighing pan is clean and that the balance reads zero.
4. Handle the mass with clean forceps or gloves when appropriate.
5. Place the mass carefully at the centre of the weighing pan.
6. Allow the reading to stabilise and record the indicated value.
7. Repeat the measurement to evaluate consistency.
8. Return every mass to its designated storage position after use.

Handling note: Do not drop, scratch, mark or handle precision masses with bare hands. Formal calibration should be performed only with a suitable certified mass and an approved procedure.

Care & Maintenance

• Store all masses in a clean, dry and closed container.
• Avoid contact with moisture, chemicals, dust and oily hands.
• Use a soft brush or approved cleaning method; do not abrade the surface.
• Arrange recalibration when traceable measurement performance is required.

Why Choose Lab Equipments Ambala

Lab Equipments Ambala manufactures and exports scientific and educational laboratory equipment from Ambala, India. Its range includes balances, physics apparatus, mass sets and measurement instruments for schools, colleges, universities and technical institutions. The company supports institutional and export supply of complete laboratory equipment requirements. Buyers should obtain the approved mass sequence, accuracy tolerance, material specification, certificate status and packing list before order confirmation.

Frequently Asked Questions

What is a Physics Mass Calibration Kit 100g used for?

It is used for teaching mass measurement and checking the response, stability and repeatability of a suitable laboratory balance around a nominal 100 g value.

Does the kit contain one weight or several weights?

The component sequence has not been verified. Confirm whether the product contains one 100 g mass or several smaller masses totaling 100 g.

Can this kit formally calibrate a balance?

Only when the supplied mass has a suitable accuracy class, documented measured value and valid calibration traceability. Otherwise, it should be used for educational work and routine balance checks.

What material is the mass made from?

The material is not verified. Stainless steel, brass or another material should not be claimed until confirmed by the manufacturer.

Is a calibration certificate included?

Certificate availability is not confirmed. Buyers requiring traceable calibration should state the certificate and accuracy-class requirement in the purchase order.

Can it be used in school physics laboratories?

Yes. It can support lessons on mass, balance operation, measurement comparison and repeatability under appropriate teacher supervision.

Request the verified composition, material, tolerance and certificate details for the Physics Mass Calibration Kit 100g, and browse the complete laboratory balances category for compatible weighing instruments.