Quick Answer: Regulated Bench Power Supply 30V 1A is a bench-top laboratory DC source with regulated output up to 30 V and 1 A, for powering and testing low-voltage electronic circuits.
Last updated: October 2026
Key Features
Output up to 30 V DC
Current up to 1 A DC
Regulated DC output, steadier than unregulated adapters or discharging cells
Bench-top format for student workstations and demonstration tables
Technical Specifications
Specification
Value
Product type
Regulated laboratory DC bench power supply
Output voltage
Up to 30 V DC
Output current
Up to 1 A DC
Regulation
Regulated output
About This Product
Breadboard circuits, Ohm's law and series-parallel resistor networks, and the biasing of diodes, LEDs and transistors are typical Electrical And Electronics uses, with the output set low before the load is connected and then raised gradually. Because the regulated output does not drift as a cell would, comparative readings over a long session stay consistent.
Frequently Asked Questions
Q1. What output does the Regulated Bench Power Supply 30V 1A give? Regulated DC up to 30 V and up to 1 A. The connected load must stay within both limits.
Q2. Can it be used to test LEDs and transistors? Yes, with correct polarity, suitable bias conditions and current limiting; a semiconductor should never be connected without an appropriate limiting circuit.
.jpg)
.jpg)
 (1).png)
.jpg)
.jpg)
 (1).png)
.png)
 (1).png)