Steel Wire Coil 100g

Product Code : SCL-EAST-11243

The Steel Wire Coil 100g is a laboratory metal-wire supply used for compatible elasticity, torsion, suspension and material-measurement experiments. It is intended for physics laboratories, schools, colleges, engineering institutes and educational workshops requiring a manageable quantity of steel wire for supervised practical activities.

Product Description

The product consists of steel wire supplied as a nominal 100 g coil. Users can cut suitable lengths from the coil for measurement, suspension or mechanical testing activities. The wire diameter, total length, steel composition, temper and surface treatment must be confirmed for the selected product.

The wire may support experiments involving extension, rigidity or torsional behaviour when its mechanical specification matches the apparatus and procedure. It can complement equipment in the Elasticity and Surface Tension range. It should not be described as stainless, spring steel, galvanized or calibrated wire without supporting documentation.

Key Features

• 100 g nominal quantity: Provides a practical wire supply for laboratory and workshop use.
• Steel construction: Supplied as metallic wire made from steel of a grade to be confirmed.
• Coiled format: Supports compact storage and controlled dispensing.
• Cut-to-length use: Allows samples to be prepared according to the experiment.
• Material-testing value: Supports suitable elasticity, rigidity and dimensional-measurement activities.
• Reusable remaining stock: Unused wire can be secured and retained for later practical work.
• Specification-based procurement: Diameter, grade, temper and coating can be approved before supply.

Technical Specifications

What’s Included in the Kit

• One coil of steel wire
• Nominal wire mass: 100 g
• Protective wrapping, label or spool

Cutters, clamps, measuring instruments, masses and experimental apparatus are not included unless stated in the approved packing list.

Applications / Uses

• Measuring wire diameter with a micrometer screw gauge
• Preparing samples for supervised extension experiments
• Studying material rigidity and torsional behaviour
• Comparing steel wire with other laboratory metal wires
• Using compatible samples with a Young’s Modulus Apparatus
• Preparing test wires for a Searle’s Rigidity Apparatus
• Supporting suitable suspension activities with a Torsion Pendulum

How to Use the Steel Wire Coil 100g

1. Confirm the required diameter, length and steel condition.
2. Wear eye protection and suitable cut-resistant gloves.
3. Secure the coil before releasing its free end.
4. Measure and mark the required wire length.
5. Cut the sample with an appropriate wire cutter.
6. Remove or cover sharp cut ends where necessary.
7. Mount the sample securely without exceeding the apparatus load limit.
8. Secure the remaining coil before returning it to storage.

Safety note: Coiled steel wire may spring open, and cut ends can cause puncture injuries. Control the free end, wear eye protection and keep the wire away from electrical outlets.

Care & Maintenance

• Store the coil in a dry cabinet away from corrosive chemicals.
• Secure the free end to prevent tangling and accidental release.
• Avoid permanent bends when straight test samples are required.
• Label opened coils with the verified diameter, grade and coating.

Why Choose Lab Equipments Ambala

Lab Equipments Ambala manufactures and exports scientific and educational laboratory equipment from Ambala, India. The company states that it was founded in 1982 and supplies physics apparatus, measurement equipment and laboratory accessories to educational institutions. Its range supports schools, colleges, universities and technical laboratories. Buyers should approve the steel grade, wire diameter, temper, finish and packaging before bulk procurement.

Frequently Asked Questions

What is Steel Wire Coil 100g used for?

It is used for compatible elasticity, torsion, suspension, dimensional-measurement and educational workshop activities.

What is the diameter of the wire?

The diameter has not been verified. Specify the required diameter in millimetres or the applicable wire-gauge system.

How long is the 100 g steel wire coil?

The total length depends on the wire diameter and steel density. Confirm the approximate length for the selected gauge.

Is the wire stainless or galvanized?

No steel grade or coating has been verified. Do not claim stainless, galvanized or spring-steel construction without documentation.

Can it be used for Young’s modulus experiments?

It may be used when its diameter, uniformity, temper and load characteristics meet the selected experimental method.

Is the wire supplied on a spool?

The packaging format has not been confirmed. Request a spool or secured coil when required for storage and dispensing.

Request the confirmed diameter, steel grade and surface specification for the Steel Wire Coil 100g, then browse the complete elasticity and surface tension equipment range for compatible laboratory apparatus.